Cf/C复合材料与纯铜的胶接辅助钎焊连接

采用胶接辅助钎焊方法,以TiH_2粉为活性元素源,环氧树脂为粘性载体,Ag-Cu共晶合金为钎料,Cu箔为应力缓冲层材料,实现了C_f/C复合材料与纯铜的钎焊连接,结果表明,接头界面处产生TiC,TiCu,Ag(s,s),Cu(s,s)等反应产物,其结构可表示为(C_f/C)/TiC+Ag(s,s)+Cu(s,s)+TiCu/Cu。通过钎焊工艺试验得出,在930℃保温25 min钎焊条件下接头的抗剪强度达到最大值30 MPa。     

Isolation and identification of two major acylated anthocyanins from purple sweet potato (Ipomoea batatas L. cultivar Eshu No. 8) by UPLC‐QTOF‐MS/MS and NMR

In recent years, researches on the isolation and preparation of monomeric anthocyanins have intensified because of the requirements of quantitative and structure–bioactivity relationship analyses. However, simple and effective methods about the scale of monomeric anthocyanins from the natural purple sweet potato powder are rarely reported. In this study, high molecular weight acylated monomeric anthocyanins were isolated from purple sweet potato (Ipomoea batatas L. cultivar Eshu No. 8) via the combination of column chromatography and semi‐preparative HPLC technology and identified mainly by ultra‐high‐performance liquid chromatography quadrupole time‐of‐flight tandem mass spectrometry/mass spectrometry (UPLC‐QTOF‐MS/MS) and ¹H and ¹³C nuclear magnetic resonance (NMR). Two major acylated anthocyanins were unambiguously determined as peonidin 3‐O‐(6‐O‐(E)‐caffeoyl‐(2‐O‐(6‐O‐p‐hydroxybenzoyl)‐β‐D‐glucopyranosyl)‐β‐D‐glucopyranoside)‐5‐O‐(β‐D‐glucopyranoside) and peonidin 3‐O‐(6‐O‐(E)‐caffeoyl‐(2‐O‐(6‐O‐(E)‐feruloyl)‐β‐D‐ glucopyranosyl)‐β‐D‐glucopyranoside)‐5‐O‐(β‐D‐glucopyranoside). The results of this study may help promote the purification of high molecular weight acylated anthocyanins from purple sweet potato as well as from other plant materials in nature.     

Mathematical formulation and heuristic algorithms for optimisation of auto-part milk-run logistics network considering forward and reverse flow of pallets

The operational planning of distribution network for automotive industry is complex with many conditions to consider, including heterogeneous fleet, enforcing the feasibility of 3D-packing of pallets into vehicles to address the vehicle's capacity in terms of weight and volume, compatibility of orders in a vehicle, returning empty pallets from assembly-plants backwards to suppliers, and delivery time windows. A mathematical model (MILP) is proposed that takes account of these conditions to minimise total transportation costs. The network structure can be a combination of direct shipment and milk-run for both forward and reverse flow of pallets. The model is solved optimally for small-size problems. For solving larger problems, a heuristic algorithm (in two versions) is proposed that uses a similarity measure to generate a reasonable list of orders. Best/first-fit strategies are employed to generate a feasible solution with the aid of a relaxed version of the proposed MILP. Improvement heuristics are also designed. Unlike most of existing constructive heuristics, our aim for developing the heuristic approach is to force routing decision, with all of its considerations, being made optimal. We also use the proposed best-fit strategy in the body of grouping evolution strategy (GES) algorithm to attain an effective meta-heuristic approach. The effectiveness of heuristics is tested on generated instances which demonstrates they are optimal for small-size problems. They are also tested on the data of daily auto-parts shipments gathered from the largest Iranian automobile company. Results demonstrate there exists a significant potential for cost saving through milk-run strategy compared with the direct shipping strategy.     

异螺距万分尺设计

介绍了一种螺旋万分尺的结构设计。该万分尺的微分筒采用双螺纹,两螺纹的螺旋方向相同,螺距不同。采用V型槽和V型块精确定位来增加量程。测量最小刻度可达0.001 mm,读数精度达0.0001 mm。万分尺采用纯机械结构,结构原理简单,制造安装方便。     

11-苄硒基十一羧酸铵盐的双重刺激响应性质

合成了一种对氧化还原(Redox)和CO_2/N_2具有双重刺激响应的表面活性剂11-苄硒基十一羧酸铵盐(BSeUA),分别利用傅里叶红外光谱、核磁共振和电喷雾质谱等手段研究了BSeUA在Redox和CO_2/N_2刺激响应前后的分子结构变化特征。结果表明,在过氧化氢和水合肼交替作用下,BSeUA分子中二价硒醚基团(-Se-)与相应的四价硒亚砜基团(-Se=O)之间可以氧化还原可逆互变,在CO_2和N_2交替作用下,BSeUA分子中羧酸根(-COO-)与相应的羧酸(-COOH)之间可以可逆互变,从而实现BSeUA对Redox和CO_2/N_2具有双重刺激响应。分别在Redox和CO_2/N_2刺激作用下,由BSeUA稳定的乳液可以在破乳和再乳化2种状态下开关可逆循环至少5次,且乳液粒径和稳定性未发生明显变化。     

固溶处理对TiB2/6061复合材料硬度及耐磨性的影响

采用氟盐法制备了TiB₂质量分数为3%的原位合成TiB₂/6061复合材料,研究了固溶温度和固溶时间对复合材料硬度和耐磨性能的影响。结果表明:TiB₂颗粒弥散分布在6061铝合金基体中,明显细化6061铝合金基体晶粒。当固溶温度一定时,随固溶时间延长,复合材料的硬度和耐磨性可获得明显提高,但固溶时间在6~10 h时,复合材料的性能变化不显著。当固溶时间一定时,随固溶温度升高,复合材料硬度和耐磨性呈现先上升后下降的趋势。3wt%TiB₂/6061复合材料经530 ℃×10 h固溶处理后,硬度和耐磨性能最佳,相较于铸态硬度值提高了79.5％,磨损量减少了59.1%。固溶处理后复合材料的磨损表面犁沟变细变浅,材料脱落现象减少。     

An Atomistic Understanding of Allosteric Inhibition of Glutamate Racemase: a Dampening of Native Activation Dynamics

Glutamate racemases (GR) are members of the family of bacterial enzymes known as cofactor-independent racemases and epimerases and catalyze the stereoinversion of glutamate. D-amino acids are universally important for the proper construction of viable bacterial cell walls, and thus have been repeatedly validated as attractive targets for novel antimicrobial drug design. Significant aspects of the mechanism of this challenging stereoinversion remain unknown. The current study employs a combination of MD and QM/MM computational approaches to show that the GR from H. pylori must proceed via a pre-activation step, which is dependent on the enzyme's flexibility. This mechanism is starkly different from previously proposed mechanisms. These findings have immediate pharmaceutical relevance, as the H. pylori GR enzyme is a very attractive allosteric drug target. The results presented in this study offer a distinctly novel understanding of how AstraZeneca's lead series of inhibitors cripple the H. pylori GR's native motions, via prevention of this critical chemical pre-activation step. Our experimental studies, using SPR, fluorescence and NMR WaterLOGSY, show that H. pylori GR is not inhibited by the uncompetitive mechanism originally put forward by Lundqvist et al.. The current study supports a deep connection between native enzyme motions and chemical reactivity, which has strong relevance to the field of allosteric drug discovery.     

Cellular/dendritic transition,dendritic growth and microhardness in directionally solidified monophasic Sn-2%Sb alloy

Horizontal directional solidification experiments were carried out with a monophasic Sn-2%Sb (mass fraction) alloy to analyze the influence of solidification thermal parameters on the morphology and length scale of the microstructure. Continuous temperature measurements were made during solidification at different positions along the length of the casting and these temperature data were used to determine solidification thermal parameters, including the growth rate (V_L) and the cooling rate (T_R). High cooling rate cells and dendrites are shown to characterize the microstructure in different regions of the casting, with a reverse dendrite-to-cell transition occurring for T_R>5.0 K/s. Cellular (l_c) and primary dendrite arm spacings (l₁) are determined along the length of the directionally-solidified casting. Experimental growth laws relating l_c and l₁ to V_L and T_R are proposed, and a comparative analysis with results from a vertical upward directional solidification experiment is carried out. The influence of morphology and length scale of the microstructure on microhardness is also analyzed.     

Fabrication of 3D Ni nanosheet array on Crofer22APU interconnect and NiO-YSZ anode support to sinter with small-size Ag nanoparticles for low-temperature sealing SOFCs

A novel low-temperature sealing method was developed to seal solid oxide fuel cells. The 3D Ni nanosheet array was pre-fabricated on faying surfaces of Crofer22APU interconnect and NiO-YSZ anode-support. Then it was covered with Au film without changing its morphology. This special nanostructure improved sintering efficiency between Ag nanoparticles and substrates. A dense joint was obtained at the low-temperature between 250 °C–300 °C. This method effectively avoided the oxidation of interconnect during sealing. When joints were sealed at 300 °C, the shear strength reached 16 MPa. The fracture was mainly located in the central Ag layer, presenting a significant plastic deformation. Due to the effective protection of Ni layer, joints also possessed excellent oxidation resistance in oxidizing atmosphere at 800 °C for 400 h. After high-temperature oxidation, the shear strength was increased to 23 MPa, revealing an increasement of 43.8% compared with the as-sealed condition (16 MPa). This sealing method has great potential in sealing solid oxide fuel cells. It also can be extended to seal other energy-conversion devices.